#!/bin/sh
name=
#nameWacom=
connected=$(xrandr -q --verbose | grep " connected primary")
output=$(echo "$connected" | head -n 1 | sed -e "s/\([a-zA-Z0-9]\+\) connected.*/\1/")
if [ -z "$output" ] ; then
echo Не найден экран для поворота
exit 1
fi
name="11;4"
IFS=';'
COMPTON_PID=`ps -C compton -o pid=`
[ ! -z $COMPTON_PID ] && kill $COMPTON_PIDconnected=$(xrandr -q --verbose | grep " connected")
output=$(echo "$connected" | head -n 1 | sed -e "s/\([a-zA-Z0-9]\+\) connected.*/\1/")
if [ -z "$output" ] ; then
echo "Не найден экран для поворота"
exit 1
fi
fi
#Try to guess about current orientation and rotate
# Find
#Find the line in "xrandr -q --verbose" output that contains current screen orientation and "strip" out current orientation.
#rotationrotation="$(xrandr -q --verbose | grep 'connected'echo "$connected" | egrep -o '\) (normal|left|inverted|right) \(' | egrep -o '(normal|left|inverted|right)')"
#cut the first connected
rotation="$(echo "$connected" | egrep -o '\) (normal|left|inverted|right) \(' | egrep -o '(normal|left|inverted|right)')"
if ! test -z "$1"; then
# Workaroiund left<->right rotation failed in Qt!
VKBD$rotation | cut -d' ' -f1)"
#Get input devices to rotate too
#\t is default delimiter, to set other use -d option, i.e. -d' ' for space
#name=`fly-wmfunc FLYWM_GET_INPUT_DEVICES 0x5 | grep -v Wacom | cut -f1 2> /dev/null | tr '\n' ';'`
#nameWacom=`fly-wmfunc FLYWM_GET_INPUT_DEVICES 0x5 | grep Wacom | cut -f1 2> /dev/null | tr '\n' ';'`
#name=`fly-wmfunc FLYWM_GET_INPUT_DEVICES 0x5 | cut -f1 2> /dev/null | tr '\n' ';'`
name="4;11"
IFS=';'
#stop compton to restart
COMPTON_PID=`ps -C fly-vkbdcompton -o pid=`
[ ! -z $VKBD$COMPTON_PID ] && fly-vkbd --minimizetotray kill $COMPTON_PID
if ! test -z "$1"; then
case "$1" in
left)
if [ "$rotation" = "right" ]; then
xrandr --output $output --rotate normal
if [ "$?" = 1 ]; then
fly-dialog --caption "Вращение экрана" --msgbox "Не удалось выполнить вращение"
exit 1
fi
sleep 3
fi
;;
right)
if [ "$rotation" = "left" ]; then
xrandr --output $output --rotate normal
if [ "$?" = 1 ]; then
fly-dialog --caption "Вращение экрана" --msgbox "Не удалось выполнить вращение"
exit 1
fi
sleep 3
fi
;;
esac
#Do required rotation
xrandr --output $output --rotate "$1"
if [ "$?" = 1 ]; then
fly-dialog --caption "Вращение экрана" --msgbox "Не удалось выполнить вращение"
exit 1
fi
case "$1" in
left)
for name_i in ${name}; do
xinput set-prop --type=int --format=8 "${name_i}" "Evdev Axes Swap" 1
xinput set-prop --type=int --format=8 "${name_i}" "Evdev Axis Inversion" 1 0
done
xinput set-prop --type=int --format=8 4 "Evdev Axis Inversion" 1 0 "${name_i}" "Wacom Rotation" 2
done
;;
right)
for name_i in ${name}; do
xinput set-prop --type=int --format=8 "${name_i}" "Evdev Axes Swap" 1
xinput set-prop --type=int --format=8 "${name_i}" "Evdev Axis Inversion" 0 1
done
xinput set-prop --type=int --format=8 4 "Evdev Axis Inversion" 0 1"${name_i}" "Wacom Rotation" 1
done
;;
normal)
for name_i in ${name}; do
xinput set-prop --type=int --format=8 "${name_i}" "Evdev Axes Swap" 0
xinput set-prop --type=int --format=8 "${name_i}" "Evdev Axis Inversion" 0 0
done
xinput set-prop --type=int --format=8 4"${name_i}" "EvdevWacom Axis InversionRotation" 0
0 done
;;
inverted)
for name_i in ${name}; do
xinput set-prop --type=int --format=8 "${name_i}" "Evdev Axes Swap" 0
xinput set-prop --type=int --format=8 "${name_i}" "Evdev Axis Inversion" 1 1
done
xinput set-prop --type=int --format=8 4 "Evdev Axis Inversion" 1 1"${name_i}" "Wacom Rotation" 3
done
;;
esac
else
rotateTo=
case "$rotation" in
normal)
rotateTo="left"
;;
left)
rotateTo="normal"
;;
esac
if ! test -z "$rotateTo"; then
xrandr --output $output --rotate $rotateTo
if [ "$?" = 1 ]; then
fly-dialog --caption "Вращение экрана" --msgbox "Не удалось выполнить вращение"
exit 1
fi
else
fly-dialog --caption "Вращение экрана" --msgbox "Не удалось определить текущую ориентацию экрана"
exit 1
fi
dentry=
#if [ -f $HOME/.fly/toolbar/rotate.desktop ]; then
# dentry=$HOME/.fly/toolbar/rotate.desktop
#fi
# Using current screen orientation proceed to rotate screen and input tools.
case "$rotation" in
normal)
#rotate to the right left
if ! test -z "$dentry"; then
sed -i 's/Icon[ \t]*[\=]*.*$/Icon=object-rotate-left/' "$dentry"
fi
for name_i in ${name}; do
xinput set-prop --type=int --format=8 "${name_i}" "Evdev Axes Swap" 1
xinput set-prop --type=int --format=8 "${name_i}" "Evdev Axis Inversion" 1 0
done
xinput set-prop --type=int --format=8 4 "Evdev Axis Inversion" 1 0 "${name_i}" "Wacom Rotation" 2
done
;;
left)
#rotate to the normal
if ! test -z "$dentry"; then
cat $dentry | sed 's/Icon[ \t]*[\=]*.*$/Icon=object-rotate-leftright/' > /tmp/dentry.tmp
mv -f /tmp/dentry.tmp $dentry
fi
for name_i in ${name}; do
xinput set-prop --type=int --format=8 "${name_i}" "Evdev Axes Swap" 0
xinput set-prop --type=int --format=8 "${name_i}" "Evdev Axis Inversion" 0 0
done
xinput set-prop --type=int --format=8 4"${name_i}" "EvdevWacom Axis InversionRotation" 0
0 done
;;
esac
fi
#alex: need delay?
#restart it after all rotation#sleep 1
#TODO: do recalculation of icon positions instead of lineup
fly-wmfunc FLYWM_ORDER_ICON
[ ! -z $COMPTON_PID ] && compton &
|