# # Default Bacula Storage Daemon Configuration file # # For Bacula release 3.0.2 (18 July 2009) -- debian 5.0.3 # # You may need to change the name of your tape drive # on the "Archive Device" directive in the Device # resource. If you change the Name and/or the # "Media Type" in the Device resource, please ensure # that dird.conf has corresponding changes. # Storage { # definition of myself Name = bacula-sd SDPort = 9103 # Director's port WorkingDirectory = "/var/lib/bacula" Pid Directory = "/var/run/bacula" Maximum Concurrent Jobs = 20 SDAddress = 11.11.11.22 } # # List Directors who are permitted to contact Storage daemon # Director { Name = bacula-dir Password = "1" } # # Restricted Director, used by tray-monitor to get the # status of the storage daemon # #Director { # Name = bakula2-mon # Password = "nxx6UI+PG+fZ1/zgw469IKLL/bUvgVQ5umX5pn8y4MkD" # Monitor = yes #} # # Note, for a list of additional Device templates please # see the directory /examples/devices # Or follow the following link: # http://bacula.svn.sourceforge.net/viewvc/bacula/trunk/bacula/examples/devices/ # # # Devices supported by this Storage daemon # To connect, the Director's bacula-dir.conf must have the # same Name and MediaType. # Device { Name = FileStorage Media Type = File Archive Device = /back LabelMedia = yes; # lets Bacula label unlabeled media Random Access = Yes; AutomaticMount = yes; # when device opened, read it RemovableMedia = no; AlwaysOpen = no; } # # An autochanger device with two drives # #Autochanger { # Name = Autochanger # Device = Drive-1 # Device = Drive-2 # Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" # Changer Device = /dev/sg0 #} #Device { # Name = Drive-1 # # Drive Index = 0 # Media Type = DLT-8000 # Archive Device = /dev/nst0 # AutomaticMount = yes; # when device opened, read it # AlwaysOpen = yes; # RemovableMedia = yes; # RandomAccess = no; # AutoChanger = yes # # # # Enable the Alert command only if you have the mtx package loaded # # Note, apparently on some systems, tapeinfo resets the SCSI controller # # thus if you turn this on, make sure it does not reset your SCSI # # controller. I have never had any problems, and smartctl does # # not seem to cause such problems. # # # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" # If you have smartctl, enable this, it has more info than tapeinfo # Alert Command = "sh -c 'smartctl -H -l error %c'" #} #Device { # Name = Drive-2 # # Drive Index = 1 # Media Type = DLT-8000 # Archive Device = /dev/nst1 # AutomaticMount = yes; # when device opened, read it # AlwaysOpen = yes; # RemovableMedia = yes; # RandomAccess = no; # AutoChanger = yes # # Enable the Alert command only if you have the mtx package loaded # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" # If you have smartctl, enable this, it has more info than tapeinfo # Alert Command = "sh -c 'smartctl -H -l error %c'" #} # # A Linux or Solaris LTO-2 tape drive # #Device { # Name = LTO-2 # Media Type = LTO-2 # Archive Device = /dev/nst0 # AutomaticMount = yes; # when device opened, read it # AlwaysOpen = yes; # RemovableMedia = yes; # RandomAccess = no; # Maximum File Size = 3GB ## Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" ## Changer Device = /dev/sg0 ## AutoChanger = yes # # Enable the Alert command only if you have the mtx package loaded ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" ## If you have smartctl, enable this, it has more info than tapeinfo ## Alert Command = "sh -c 'smartctl -H -l error %c'" #} # # A Linux or Solaris LTO-3 tape drive # #Device { # Name = LTO-3 # Media Type = LTO-3 # Archive Device = /dev/nst0 # AutomaticMount = yes; # when device opened, read it # AlwaysOpen = yes; # RemovableMedia = yes; # RandomAccess = no; # Maximum File Size = 4GB ## Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" ## Changer Device = /dev/sg0 ## AutoChanger = yes # # Enable the Alert command only if you have the mtx package loaded ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" ## If you have smartctl, enable this, it has more info than tapeinfo ## Alert Command = "sh -c 'smartctl -H -l error %c'" #} # # A Linux or Solaris LTO-4 tape drive # #Device { # Name = LTO-4 # Media Type = LTO-4 # Archive Device = /dev/nst0 # AutomaticMount = yes; # when device opened, read it # AlwaysOpen = yes; # RemovableMedia = yes; # RandomAccess = no; # Maximum File Size = 5GB ## Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" ## Changer Device = /dev/sg0 ## AutoChanger = yes # # Enable the Alert command only if you have the mtx package loaded ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" ## If you have smartctl, enable this, it has more info than tapeinfo ## Alert Command = "sh -c 'smartctl -H -l error %c'" #} # # A FreeBSD tape drive # #Device { # Name = DDS-4 # Description = "DDS-4 for FreeBSD" # Media Type = DDS-4 # Archive Device = /dev/nsa1 # AutomaticMount = yes; # when device opened, read it # AlwaysOpen = yes # Offline On Unmount = no # Hardware End of Medium = no # BSF at EOM = yes # Backward Space Record = no # Fast Forward Space File = no # TWO EOF = yes # If you have smartctl, enable this, it has more info than tapeinfo # Alert Command = "sh -c 'smartctl -H -l error %c'" #} # # Send all messages to the Director, # mount messages also are sent to the email address # Messages { Name = Standard director = bacula-dir = all }